home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Power DOS 1996 July
/
Power DOS - July 1996.iso
/
sound
/
c_labs
/
vb
/
vbrt3w95.exe
/
README.TXT
< prev
next >
Wrap
Text File
|
1995-11-02
|
2KB
|
41 lines
**********************************************************************
Copyright (c) Creative Technology Ltd, 1995. All rights reserved.
**********************************************************************
Video Blaster RT300 for Windows 95
----------------------------------
Overview of the Installation process
====================================
It is recommended that you do not install the hardware into the computer
until you have finished the software installation steps below.
Software Installation Steps:
1. Insert the installation disk into your floppy drive.
2. Install the software application package into the system. See "To
Install Package" in README.HLP for more instructions.
3. Next, you will need to install the software drivers. At the end of the
installation, a help file (README.HLP) will be launched to guide you
through this step.
4. After the drivers have been installed, Windows 95 will assign resources
for the hardware. Take note of this resource configuration, and shut
down the system when prompted.
5. Set the jumpers on the hardware using the resource settings obtained
from (4).
6. Now install the hardware into a free expansion slot in the system.
(Remember to turn off all power to the computer first!)
7. Restart the computer. The installation is complete!
Troubleshooting Hardware Problems:
==================================
If you encounter hardware problems after installation, please run the Video
Blaster RT300 Diagnose utility which will help pinpoint any hardware fault.
Uninstallating the Software Package:
====================================
Refer to "To Uninstall" in README.HLP which will give you step-by-step
instruction on how to uninstall the software applications and drivers from
the system.